Custom Search

---

Maser Electronics (P) Ltd.

MASER CRMS SOFTWARE

Maser CRMS (Centralized Reporting and Monitoring System) Software

Salient Features

• Easy to Install.

• Centralized Reporting and Monitoring System.

• Facility to configure MASER Torrant USFG controller parameters for all controllers in one go (broadcast) or for an individual controller.

• Facility to schedule / generate a consolidated Health Status Report of all the controllers and / or an individual controller. This is possible either with the help of the inbuilt scheduler or in real time.

• Individual folders for individual Torrant Controller reports with the folder name same as the machine id. One single folder for the consolidated report.

• PCB snapshot of the controller for faulty transducer drivers.

• Configurable control of the image quality of the PCB snapshot, thereby enabling the customer to manage the computer memory effectively.

• Admin Level password for report generation and scheduling.

• Service Level password for parameter configuration of all / individual controllers.

• Test facility to check if the signal is being transmitted to the transducer from the drivers on the PCB.

• Ping facility to check if all the controllers installed at the customer site are in the daisy chain network. If not then the corresponding controller will have an ‘Offline’ status else it will have an ‘Online’
  status.

• Configurable ping acknowledgement / return time. This would be the time for which Maser Torrant CRMS software would wait for the controller to respond before it confirms the status of the controller as ‘Online’ or ‘Offline’.

• Test Facility to test all controllers in a sequential mode or in an individual mode.